|
Fluorometer cells have at least three windows clear. They are designed for use in a fluorometer which passes an excitation beam through the cell and then reads the fluoresence emission at a 90 degree angle. There are variations on this theme but we make a wide range of cells to allow you to use everything from normal full volume cells to very small volumes.
|
| Standard Rectangular |
Full interior width |
| Open Top, Standard |
Most commonly used fluorometer cells! |
| Stopper Top, Standard |
Stopper top for volatile samples |
| Screw Top, Standard |
Standard cells with tight sealing screw cap |
| Spetum Top, Standard |
Standard cells with septum screw cap |
| Semi-Micro |
Sample chamber 4mm wide, Volume reduced by 60% of standard cell |
| Open Top, Semi-micro |
Reduce sample volume by 60% |
| Stopper Top, Semi-micro |
Stopper top for volatile samples |
| Micro |
Sample chamber 2mm wide, Volume reduced by 80% of standard cell |
| Open Top, Micro |
Reduce sample volume by 80% |
| Stopper Top, Micro |
Stopper top for volatile samples |
| Micro, Square |
Small Volume cells with square cross section |
| Open Top, Square Micro |
Reduced volume and square cross section |
| Stopper Top, Square Micro |
Reduced volume, square with stopper |
| Sub-Micro |
Highly optimized cells for sample volumes from 10 to 160 microliters |
| Sub-micro cells |
Sample volumes from 160 to 10 microliter |
| Flowcells |
Flowcells optimized for fluorometers |
| Fluorometer flow cells |
Range of flow cells with volumes from 0.008 to 4.0 ml |
