Fluorometer Cell, Micro
Septum Cap and Screw Cap
Septum Cap and Screw Cap
| Description: | Fluorometer Cells Rectangular Micro with Screw Top |
|---|---|
| Physical Configuration: | Thick windows parallel to light path, sample chamber 2mm wide, which allows for a sample volume reduction by 80% from standard cells. |
| Primary use: | Fluorescence measurement in useable range (see charts below) |
| Clear windows: | Four, with base polished |
| Instrument: | Can be used with virtually all fluorometers |
| Pathlengths available: | 10mm |
| Cell top: | Screw cap with either tight sealing silicone liner or septum. |
| Closed Cap specifications: | Red polymer, 20mm diameter, 17mm tall |
| Septum Cap specifications: | Red polymer, 20mm diameter, 17mm tall, septum access hole is 9.5mm diameter |
| Septum specifications: | Silicone rubber, non-coring, 12.55 diameter, 2.5mm thick |
Cell with Septum cap:
The plastic cap has a hole in the centre exposing the silicone septum seal so that it may be pierced with a syringe needle. The cap seals tightly and is suitable for storage and mixing.
| Window material Spectrosil Quartz or equivalent, useable range: 170 to 2700nm | ||||||||
|---|---|---|---|---|---|---|---|---|
| Starna | Path | Exterior | Interior | Nominal | Number | |||
| Catalog | Length | Width | Length | Height | Width | Length | Volume | Polished |
| Number | mm | mm | mm | mm | mm | mm | ml | Windows |
| 18F-Q-10-GL14-S | 10 | 12.5 | 12.5 | 68 | 2 | 10 | 0.700 | 4 |
Cell with Sealing cap:
The cap is a standard design with a silicone gasket which seals tightly for mixing and storage.
| Window material Spectrosil Quartz or equivalent, useable range: 170 to 2700nm | ||||||||
|---|---|---|---|---|---|---|---|---|
| Starna | Path | Exterior | Interior | Nominal | Number | |||
| Catalog | Length | Width | Length | Height | Width | Length | Volume | Polished |
| Number | mm | mm | mm | mm | mm | mm | ml | Windows |
| 18F-Q-10-GL14-C | 10 | 12.5 | 12.5 | 68 | 2 | 10 | 0.700 | 4 |